Conductivity Controller 511-M:

Single Range 19.99micro, 199.9micro, 1999micro, 19.99mili, 199.9mili.
( Select Any One Range, Required)
Resolution 0.01micro, 0.1micro, 1micro, 10micro, 100micro
Accuracy ± 1% Of Full Scale
Display Upper Display For Conductivity( Red LED) & Lower Display for
Set Value ( Green LED), If ATC Its Show Tem
Control Setting Two Set Point ( High & Low)
Controlling Output One Changeover Relay of Potential Free Contacts of 5Amp
Supply 230v A.C ± 10% /50Hzs
Cell ( Flow Type) "BSP thread or 3/4" BSP thread ( Cell Constant 0.5 to 3.0)
Environment 5 to 50° c.
Size 96 x 96 x 110mm ( Gray Color ABS Plastic Housing, Panel Mount)
Optional Facility At Extra Cost Auto Temp. Compensation, 4-20mA Output
Printer Output ( RS 232)
Copyright © 2009 Digital Instruments Corporation. All Rights Reserved.